ഫലകം:Infobox golf facility/doc

This is a documentation subpage for ഫലകം:Infobox golf facility.
It may contain usage information, categories and other content that is not part of the original ഫലകം page.

Usage

{{Infobox golf facility
| name                = <!-- name of the facility --> 
| image               = <!-- just name file name, no [[image:]] or size required -->
| imagesize           = <!-- include units -->
| caption             = 
| pushpin_map         = <!-- name of a location map (see Template:Location map) -->
| relief              = <!-- any non-blank value to display relief map, if available -->
| pushpin_mapsize     = <!-- width of map (e.g., 220 without the px), default is 250 -->
| pushpin_map_alt     = <!-- alternative text for map, see WP:ALT for details -->
| pushpin_map_caption = <!-- text displayed below map, overrides default caption -->
| latd  = | latm  = | lats  = | latNS  =
| longd = | longm = | longs = | longEW =
| coordinates_display = inline,title
| iso_region          = 
| location            = 
| establishment       = <!-- year -->
| type                = <!-- public/private -->
| owner               = <!-- name of organization/company -->
| operator            = <!-- name of organization/company -->
| holes               = <!-- total number of holes at club/resort -->
| greens              = <!-- type of grass used -->
| fairways            = <!-- type of grass used -->
| tournaments         = <!-- notable tournaments held (if any) -->
| website             = 
| course1             = <!-- individual course name, can leave blank if same as article title -->
| designer1           = 
| par1                =
| length1             = 
| rating1             = 
| slope1              =
| record1             = 
| image2              = <!-- a second image -->
| imagesize2          = 
| caption2            = 
}}

Additional courses

To add additional courses (up to 8 total) use

| course2            = <!-- if only one course: leave this entry and all below parts blank -->
| designer2          = 
| par2               = 
| length2            = 
| rating2            = 
| slope2             =
| record2            =

| course3            = 
| designer3          = 
| par3               = 
| length3            = 
| rating3            = 
| slope3             =
| record3            =

| course4            = 
| designer4          = 
| par4               = 
| length4            = 
| rating4            =
| slope4             = 
| record4            =

| course5            = 
| designer5          = 
| par5               = 
| length5            = 
| rating5            = 
| slope5             =
| record5            =

| course6            = 
| designer6          = 
| par6               = 
| length6            = 
| rating6            =
| slope6             = 
| record6            =

| course7            = 
| designer7          = 
| par7               = 
| length7            = 
| rating7            = 
| slope7             =
| record7            =

| course8            = 
| designer8          = 
| par8               = 
| length8            = 
| rating8            =
| slope8             = 
| record8            =

U.S. National Register of Historic Places

Infobox NRHP can be embedded in this template using the "nrhp" parameter as follows:

{{Infobox golf facility
| name = 
...
| nrhp = {{Infobox NRHP|embed = yes
          | name =  
          ...
         }}
}}

Map and coordinates

It's usually not necessary to use the coordinates= parameter.

The latitude and longitude of the course may be specified:
- in decimal degrees, using latitude= and longitude= OR
- in degrees/minutes/seconds, using latd=, latm=, lats=, latNS=, longd=, longm=, longs=, and longEW=.
To display coordinates at the top of the page, set coordinates_display= to any non-blank value. Otherwise coordinates will appear in the infobox only.
The ISO 3166-1 alpha-2 or ISO 3166-2 region code is set using the iso_region= parameter.

One advantage of omitting the coordinates= parameter is that you can display a {{Location map}} without duplicating coordinates.

Parameters to specify coordinates in degrees, minutes, and seconds of arc:

{{Infobox golf facility
...
| latd   = <!-- ''latitude'' degrees -->
| latm   = <!-- ''latitude'' minutes -->
| lats   = <!-- ''latitude'' seconds -->
| latNS  = <!-- latitude: S=south, N=north (default) -->
| longd  = <!-- ''longitude'' degrees -->
| longm  = <!-- ''longitude'' minutes -->
| longs  = <!-- ''longitude'' seconds -->
| longEW = <!-- longitude: W=west, E=east (default) -->
...
}}

Parameters to specify coordinates in decimal degrees:

{{Infobox golf facility
...
| latitude  = <!-- ''latitude'' (decimal format; enter negative numbers for southern latitude) -->
| longitude = <!-- ''longitude'' (decimal format; enter negative numbers for western longitude) --> 
...
}}

Note: coordinates in decimal degrees are sensitive to extra whitespace in the parameters:

Incorrect: | longitude = - 123.45
Correct: | longitude = -123.45

Coordinates

For coordinates, use {{coord}} with display=inline,title. Please do not be overly precise.

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox golf facility in articles based on its TemplateData.

TemplateData for Infobox golf facility

This is an infobox to describe individual golf courses.

ഫലകത്തിനുള്ള ചരങ്ങൾ
ചരം		വിവരണം	തരം	സ്ഥിതി
Name	`name`	The name of the facility സ്വതേ default value	പദം	ഐച്ഛികം
Picture of course	`image`	A representative picture of the facility; just add the filename of a picture.	താൾ	ഐച്ഛികം
Picture Size	`imagesize`	Provide the unit in the value; for instance, "98 pixels"	പദം	ഐച്ഛികം
Caption for picture	`caption`	വിവരണമൊന്നുമില്ല	പദം	ഐച്ഛികം
Year course established	`establishment`	വിവരണമൊന്നുമില്ല	എണ്ണം	ഐച്ഛികം
Type of course	`type`	Typically only "Public" or "Private".	പദം	ഐച്ഛികം
Owner of course	`owner`	This is the owner of the golf course; if the owner has a wikipedia entry, markup with "[[" and "]]".	പദം	ഐച്ഛികം
Operator of course	`operator`	This is the operator of the golf course; if the owner has a wikipedia entry, markup with "[[" and "]]".	പദം	ഐച്ഛികം
Holes count	`holes`	Number of holes in the course (e.g. 18)	എണ്ണം	ഐച്ഛികം
Greens	`greens`	Type of grass used	പദം	ഐച്ഛികം
Fairways	`fairways`	Type of grass used	പദം	ഐച്ഛികം
Tournaments held at course	`tournaments`	The tournaments listed should be notable, meaning they have wikipedia entries for them (markup with "[[" and "]]")	പദം	ഐച്ഛികം
Website	`website`	If there is a website for the course, add it here.	പദം	ഐച്ഛികം

The following parameters have not been added to the templatedata yet:

pushpin_map =
relief =
pushpin_mapsize =
pushpin_map_alt =
pushpin_map_caption =
latd = | latm = | lats = | latNS =
longd = | longm = | longs = | longEW =
coordinates_display = inline,title
iso_region =
location =
course1 =
designer1 =
par1 =
length1 =
rating1 =
slope1 =
record1 =
image2 =
imagesize2 =
caption2 =