ഫലകം:Chembox CalcTemperatures/doc/parameter list

This parameter list:

Four or less parameters are needed to present temperature data:

`\|MeltingPt=Decomposes when >` `\|MeltingPtC=50` `\|MeltingPt_ref=<ref>[www.example.com]</ref>` `\|MeltingPt_notes=My notes<ref>[www.chemspider.com]</ref>`	`Decomposes when >_50 °C (122 °F; 323 K)^[1]_My notes^[2]`
The options for conversion: `\|MeltingPtC=50` `\|MeltingPtF=50` `\|MeltingPtK=50` Temperature range: `\|MeltingPtC=50 to 70` `\|MeltingPtF=50 to 70` `\|MeltingPtK=50 to 70`

| Section = {{Chembox Properties
| MeltingPt =
| MeltingPtC =
| MeltingPtF =
| MeltingPtK =
| MeltingPt_ref =
| MeltingPt_notes =

| BoilingPt =
| BoilingPtC =
| BoilingPtF =
| BoilingPtK =
| BoilingPt_ref =
| BoilingPt_notes =

  }}

  {{Chembox Properties}} - all temperature parameters
Any text for melting point value
Temperature, number only. Can be a range: '100 to 200'
 number, when in Fahrenheit
 number, when in Kelvin
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)

Any text for boiling point value
Temperature, number only. Can be a range: '100 to 200'
 number, when in Fahrenheit
 number, when in Kelvin
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)

| Section = {{Chembox Hazards
| FlashPt =
| FlashPtC =
| FlashPtF =
| FlashPtK =
| FlashPt_ref =
| FlashPt_notes =

| AutoignitionPt =
| AutoignitionPtC =
| AutoignitionPtF =
| AutoignitionPtK =
| AutoignitionPt_ref =
| AutoignitionPt_notes =
  }}

  {{Chembox Hazards}} - all temperature parameters
Any text for Flash point value.
Temperature, number only. Can be a range: '100 to 200'
 number, when in Fahrenheit
 number, when in Kelvin
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)

Any text for autoignition temperature value
Temperature, number only. Can be a range: '100 to 200'
 number, when in Fahrenheit
 number, when in Kelvin
References (always shows, right after calculations or 'any text')
Notes (always shows last; can include references)

Deprecated

Melting	Boiling	Flash	Autoignition	Use
MeltingPtPrefix=	BoilingPtPrefix=	FlashPtPrefix=	AutoignitionPtPrefix=	MeltingPt= is shown as first text always
MeltingPtCL= MeltingPtCH=	BoilingPtCL= BoilingPtCL=	FlashPtCL= FlashPtCH=	AutoignitionPtCL= AutoignitionPtCL=	range input: MeltingPtC=10 to 20
MeltingPtFL= MeltingPtFH=	BoilingPtFL= BoilingPtFL=	FlashPtFL= FlashPtFH=	AutoignitionPtFL= AutoignitionPtFL=	range input: MeltingPtF=10 to 20
MeltingPtKL= MeltingPtKH=	BoilingPtKL= BoilingPtKL=	FlashPtKL= FlashPtKH=	AutoignitionPtKL= AutoignitionPtKL=	range input: MeltingPtK=10 to 20