ഫലകം:Infobox connector

ഫലകത്തിന്റെ വിവരണം

Template:Infobox connector is an infobox for electrical and (audio/video) signal connectors of all kinds.

The template supports three images:

• image, logo, pinout_image

Image and logo share a 300 pixel wide area - so if both are used then the width of the image should be set to 150 pixels, that is, [[Image:example.jpg|150px]]. If only image and pinout are used, then the size of both should be 300 pixels.

Usage

{{{name}}}

{{{logo}}}{{{image}}} {{{caption}}}
Type	{{{type}}}
Production history
Designer	{{{designer}}}
Designed	{{{design_date}}}
Manufacturer	{{{manufacturer}}}
Produced	{{{production_date}}}
Superseded	{{{superseded}}}
Superseded by	{{{superseded_by}}} ({{{superseded_by_date}}})
General specifications
Weight	{{{weight}}}
Length	{{{length}}}
Diameter	{{{diameter}}}
Width	{{{width}}}
Height	{{{height}}}
Hot pluggable	{{{hotplug}}}
Daisy chain	{{{daisy_chain}}}
External	{{{external}}}
Audio signal	{{{audio_signal}}}
Video signal	{{{video_signal}}}
Cable	{{{cable}}}
Passband	{{{passband}}}
Pins	{{{num_pins}}}
Connector	{{{physical_connector}}}
Electrical
Signal	{{{electrical}}}
Earth	{{{earth}}}
Max. voltage	{{{maximum_voltage}}}
Max. current	{{{maximum_current}}}
Data
Data signal	{{{data_signal}}}
Width	{{{data_bit_width}}}
Bitrate	{{{data_bandwidth}}}
Max. devices	{{{data_devices}}}
Protocol	{{{data_style}}}
Pin out
{{{pinout_image}}}
{{{pinout_caption}}}
{{{pinout_image2}}}
{{{pinout_caption2}}}
Pin	{{{pinout_col1_name}}}	{{{pinout_col2_name}}}
Pin 1	{{{pin1_name}}}	{{{pin1}}}
Pin 2	{{{pin2_name}}}	{{{pin2}}}
Pin 3	{{{pin3_name}}}	{{{pin3}}}
Pin 4	{{{pin4_name}}}	{{{pin4}}}
Pin 5	{{{pin5_name}}}	{{{pin5}}}
Pin 6	{{{pin6_name}}}	{{{pin6}}}
Pin 7	{{{pin7_name}}}	{{{pin7}}}
Pin 8	{{{pin8_name}}}	{{{pin8}}}
Pin 9	{{{pin9_name}}}	{{{pin9}}}
Pin 10	{{{pin10_name}}}	{{{pin10}}}
Pin 11	{{{pin11_name}}}	{{{pin11}}}
Pin 12	{{{pin12_name}}}	{{{pin12}}}
Pin 13	{{{pin13_name}}}	{{{pin13}}}
Pin 14	{{{pin14_name}}}	{{{pin14}}}
Pin 15	{{{pin15_name}}}	{{{pin15}}}
Pin 16	{{{pin16_name}}}	{{{pin16}}}
Pin 17	{{{pin17_name}}}	{{{pin17}}}
Pin 18	{{{pin18_name}}}	{{{pin18}}}
Pin 19	{{{pin19_name}}}	{{{pin19}}}
Pin 20	{{{pin20_name}}}	{{{pin20}}}
Pin 21	{{{pin21_name}}}	{{{pin21}}}
Pin 22	{{{pin22_name}}}	{{{pin22}}}
Pin 23	{{{pin23_name}}}	{{{pin23}}}
Pin 24	{{{pin24_name}}}	{{{pin24}}}
Pin 25	{{{pin25_name}}}	{{{pin25}}}
Pin 26	{{{pin26_name}}}	{{{pin26}}}
Pin 27	{{{pin27_name}}}	{{{pin27}}}
Pin 28	{{{pin28_name}}}	{{{pin28}}}
Pin 29	{{{pin29_name}}}	{{{pin29}}}
Pin 30	{{{pin30_name}}}	{{{pin30}}}
Pin 31	{{{pin31_name}}}	{{{pin31}}}
Pin 32	{{{pin32_name}}}	{{{pin32}}}
Pin 33	{{{pin33_name}}}	{{{pin33}}}
Pin 34	{{{pin34_name}}}	{{{pin34}}}
Pin 35	{{{pin35_name}}}	{{{pin35}}}
Pin 36	{{{pin36_name}}}	{{{pin36}}}
Pin 37	{{{pin37_name}}}	{{{pin37}}}
Pin 38	{{{pin38_name}}}	{{{pin38}}}
Pin 39	{{{pin39_name}}}	{{{pin39}}}
Pin 40	{{{pin40_name}}}	{{{pin40}}}
{{{pin_custom1_name}}}	{{{pin_name_custom1}}}	{{{pin_custom1}}}
{{{pin_custom2_name}}}	{{{pin_name_custom2}}}	{{{pin_custom2}}}
{{{pin_custom3_name}}}	{{{pin_name_custom3}}}	{{{pin_custom3}}}
{{{pin_custom4_name}}}	{{{pin_name_custom4}}}	{{{pin_custom4}}}
{{{pin_custom5_name}}}	{{{pin_name_custom5}}}	{{{pin_custom5}}}
{{{pin_custom6_name}}}	{{{pin_name_custom6}}}	{{{pin_custom6}}}
{{{pin_custom7_name}}}	{{{pin_name_custom7}}}	{{{pin_custom7}}}
{{{pin_custom8_name}}}	{{{pin_name_custom8}}}	{{{pin_custom8}}}
{{{pinout_notes}}}

{{Infobox connector
| name               = 
| type               = 
| image              = 
| logo               = 
| caption            = 
| designer           = 
| design_date        = 
| manufacturer       = 
| production_date    = 
| superseded         = 
| superseded_by      = 
| superseded_by_date = 
| weight             = 
| length             = 
| diameter           = 
| width              = 
| height             = 
| hotplug            = 
| daisy_chain        = 
| external           = 
| electrical         = 
| earth              = 
| maximum_voltage    = 
| maximum_current    = 
| audio_signal       = 
| video_signal       = 
| data_signal        = 
| data_bit_width     = 
| data_bandwidth     = 
| data_devices       = 
| data_style         = 
| cable              = 
| high_freq          = 
| physical_connector = 
| num_pins           = 
| pinout_col1_name   = 
| pinout_col2_name   = 
| pinout_image       = 
| pinout_caption     = 
| pinout_image2      = 
| pinout_caption2    = 
| pin1               = 
| pin1_name          = 
| pin2               = 
| pin2_name          = 
| pin3               = 
| pin3_name          = 
| pin4               = 
| pin4_name          = 
| pin5               = 
| pin5_name          = 
| pin6               = 
| pin6_name          = 
| pin7               = 
| pin7_name          = 
| pin8               = 
| pin8_name          = 
| pin9               = 
| pin9_name          = 
| pin10              = 
| pin10_name         = 
| pin11              = 
| pin11_name         = 
| pin12              = 
| pin12_name         = 
| pin13              = 
| pin13_name         = 
| pin14              = 
| pin14_name         = 
| pin15              = 
| pin15_name         = 
| pin16              = 
| pin16_name         = 
| pin17              = 
| pin17_name         = 
| pin18              = 
| pin18_name         = 
| pin19              = 
| pin19_name         = 
| pin20              = 
| pin20_name         = 
| pin21              = 
| pin21_name         = 
| pin22              = 
| pin22_name         = 
| pin23              = 
| pin23_name         = 
| pin24              = 
| pin24_name         = 
| pin25              = 
| pin25_name         = 
| pin26              = 
| pin26_name         = 
| pin27              = 
| pin27_name         = 
| pin28              = 
| pin28_name         = 
| pin29              = 
| pin29_name         = 
| pin30              = 
| pin30_name         = 
| pin31              = 
| pin31_name         = 
| pin_custom1_name   = 
| pin_name_custom1   = 
| pin_custom1        = 
| pin_custom2_name   = 
| pin_name_custom2   = 
| pin_custom2        = 
| pin_custom3_name   = 
| pin_name_custom3   = 
| pin_custom3        = 
| pin_custom4_name   = 
| pin_name_custom4   = 
| pin_custom4        = 
| pin_custom5_name   = 
| pin_name_custom5   = 
| pin_custom5        = 
| pin_custom6_name   = 
| pin_name_custom6   = 
| pin_custom6        = 
| pin_custom7_name   = 
| pin_name_custom7   = 
| pin_custom7        = 
| pin_custom8_name   = 
| pin_name_custom8   = 
| pin_custom8        = 
| pinout_notes       = 
}}

Example

D4 Video connector

This example is not factual – it is purely illustrative of the infobox.
Type	Analogue video connector
Production history
Designer	Some guy
Designed	Early 1990s
Manufacturer	Initially Toshiba
Produced	Early 1990s to 2005
Superseded	RF connector
Superseded by	DVI connector (2005)
General specifications
Length	36 mm (typical)
Width	25 mm
Height	6.5 mm
Hot pluggable	Yes
External	External
Audio signal	None
Video signal	Analogue 480i, 480p, 720p, 1080i
Cable	14 core shielded (25 m max)
Passband	0–20 GHz
Pins	14 (6 video, 3 reserved, 2 detect, 3 data)
Connector	DB-25
Electrical
Signal	220 volts AC 50 Hz typically
Earth	Dedicate pin
Max. voltage	450 volts peak
Max. current	20 amps at 220 volts, 5 amps at 400 volts
Data
Data signal	Resolution and Aspect ratio only
Width	2 bits
Bitrate	120 bit/s
Max. devices	1
Protocol	Serial
Pin out
A male connector seen from the front.
Pin	Spec name	Example col title
Pin 1	Y	luminance (0.7 V, 75 Ω)
Pin 2	Y GND	Y ground
Pin 3	Pb	0.35 V, 75 Ω
Pin 4	Pb GND
Pin 5	Pr	0.35 V, 75 Ω
Pin 6	Pr GND
Pin 7		Reserve link 1
Pin 8	Data line 1	0 V = 525 lines 2.2 V = 750 lines 5 V = 1125 lines
Pin 9	Data line 2	0 V = 59.94i / 60i 5 V = 59.94p / 60p
Pin 10		Reserve link 2
Pin 11	Data line 3	0 V = 4:3 2.2 V = 4:3 letterbox 5 V = 16:9
Pin 12	Plug insert detect ground
Pin 13		Reserve link 3
Pin 14	Plug insert detect	output 10 kΩ, input > 100 kΩ
C1	BLUE	Analog Blue Video
C2	GREEN	Analog Green Video
C3	HA_SYNC	Analog Horizontal Sync
C4	RED	Analog Red Video
C5	RETURN	Analog RGB Return and DDC Return
C6	AR_PRE	Acid reflux preventer
C7	AR_ENC	Acid reflux encourager
C8	CHRO	Churro presence detect
These are some notes about the pinout of this connector. The pins are razor sharp.

{{Infobox connector
| name = D4 Video connector
| image = [[File:SCART 20050724 002.jpg|150px]]
| logo = [[File:D4 connector.png|150px]]
| caption = This example is not factual – it is purely illustrative of the infobox.
| type = [[analog electronics|Analogue]] video connector
| designer = Some guy
| design_date = Early 1990s
| manufacturer = Initially [[Toshiba]]
| production_date = Early 1990s to 2005
| superseded = [[RF connector]]
| superseded_by = [[DVI connector]]
| superseded_by_date = 2005
| external = External
| hotplug = Yes
| length = 36 mm (typical)
| width = 25 mm
| height = 6.5 mm
| electrical = 220 volts AC 50 Hz typically
| earth = Dedicate pin
| maximum_voltage = 450 volts peak
| maximum_current = 20 amps at 220 volts, 5 amps at 400 volts
| audio_signal = None
| video_signal = [[analog signal|Analogue]] [[480i]], [[480p]], [[720p]], [[1080i]]
| data_signal = Resolution and [[Aspect ratio (image)|Aspect ratio]] only
| data_bit_width = 2 bits
| data_bandwidth = 120 bit/s
| data_devices = 1
| data_style = [[Serial communications|Serial]]
| physical_connector = DB-25
| cable = 14 core shielded (25 m max)
| passband = 0–20 GHz
| num_pins = 14 (6 video, 3 reserved, 2 detect, 3 data)
| pinout_image = [[File:D4 connector.png|300px]]
| pinout_caption = A male connector seen from the front.
| pinout_col1_name = Spec name
| pinout_col2_name = Example col title
| pin1 = [[Luminance (video)|luminance]] (0.7 V, 75 Ω)
| pin1_name = Y
| pin2 = Y [[Ground (electricity)|ground]]
| pin2_name = Y GND
| pin3 = 0.35 V, 75 Ω
| pin3_name = Pb
| pin4 = 
| pin4_name = Pb GND
| pin5 = 0.35 V, 75 Ω
| pin5_name = Pr
| pin6 = 
| pin6_name = Pr GND
| pin7 = Reserve link 1
| pin7_name = 
| pin8 = 0 V = 525 lines<br /> 2.2 V = 750 lines<br /> 5 V = 1125 lines
| pin8_name = Data line 1
| pin9 = 0 V = 59.94i / 60i<br /> 5 V = 59.94p / 60p
| pin9_name = Data line 2
| pin10 = Reserve link 2
| pin10_name = 
| pin11 = 0 V = 4:3 <br /> 2.2 V = 4:3 letterbox <br /> 5 V = 16:9
| pin11_name = Data line 3
| pin12 = 
| pin12_name = Plug insert detect ground
| pin13 = Reserve link 3
| pin13_name = 
| pin14 = output 10 kΩ, input > 100 kΩ
| pin14_name = Plug insert detect
| pin_custom1_name = C1
| pin_name_custom1 = BLUE
| pin_custom1 = Analog Blue Video
| pin_custom2_name = C2
| pin_name_custom2 = GREEN
| pin_custom2 = Analog Green Video
| pin_custom3_name = C3
| pin_name_custom3 = HA_SYNC
| pin_custom3 = Analog Horizontal Sync
| pin_custom4_name = C4
| pin_name_custom4 = RED
| pin_custom4 = Analog Red Video
| pin_custom5_name = C5
| pin_name_custom5 = RETURN
| pin_custom5 = Analog RGB Return and DDC Return
| pin_custom6_name = C6
| pin_name_custom6 = AR_PRE
| pin_custom6 = [[Acid reflux]] preventer
| pin_custom7_name = C7
| pin_name_custom7 = AR_ENC
| pin_custom7 = Acid reflux encourager
| pin_custom8_name = C8
| pin_name_custom8 = CHRO
| pin_custom8 = Churro presence detect
| pinout_notes = These are some notes about the pinout of this connector. The pins are razor sharp.
}}